Instruction manual

XWEB 500 – rel.1.0 –
“Commands” row is very important. You have to mark same values that you have marked before in the other
section. In order to give XWEB 500 the possibility to send commands to the instruments. This is necessary
because for example if you have changed “Generic Alarm” to “Ausiliary” in “digital Resources” section, then
you have to mark “Aux on” and “Aux off” in “Commands” section to be able to turn on/off the output by
means of the XWEB 500. Of course you have to do this kind of changes every time you have made some
modifications to the controllers.
10/01/2006- 1592010900 Pag. 93 / 103