Instruction manual

XWEB 500 – rel.1.0
3.8.1 MANAGING THE USERS
You can interact with a user in 3 different ways:
• Setting-up permission.
• Disabling the user (Enabling check box on the top right corner).
• Modify account and password
3.9 TOOLS SECTION
XWEB 500 has a complete set of useful tools to help the user managing in the best way both the monitoring
unit and the controllers connected on the RS 485. Click on “Tools” menu to start using it.
3.9.1 DATA LOG STATUS
One of the most important tools is the “Data log Status”. This window gives you important information
concerning the available amount of memory reserved to store data values. Value “Log” followed by a
percentage is the amount of used memory at the present moment. XWEB 500 will give you a forecast
expressed in days/hours on the duration of the stored data starting back from the last recorded value. The
archive is in FIFO format, so the first data (the oldest one) is also the first to be overwritten. To enlarge this
recording time you can decide which values you really need to store. To do this please click on
“Configuration” -> “Devices” roll-down menu and select a controller. At this point uncheck all the value you do
no want to record. In the following example DI “Defrost Start” is shown but not recorded.
3.9.2 RS 485 TEST
It is possible to make a test on the RS 485 line. Click on “RS 485”. The following window will appear:
86/103 10/01/2006 - 1592010900