Instruction manual

XWEB 500 – rel.1.0 –
3.7 ALARM MENU
3.7.1 HYSTORICAL ALARMS
This function shows you all the alarm events detected from the XWEB 500 system. It is also possible to
setup a search filter.
• Alarm view and filters
To enter the alarm view, click on “Alarm” -> “Historical” menu.
The Device Alarm Page is divided onto 3 main section: Actions, Device filter and Alarm filter.
The “Alarm Filter” defines which alarm level and which kind of alarm to search.
The “Device Filter” defines the typology and the name of the instrument to search.
The “Action” menu allows the user to decide what action to start: Save on disk in html format, view in the
current window or print alarm.
The system automatically loads all the alarm. The user can filter which one wants to view using “Actual”
or “Last” and insert the number of days back to show.
The alarm description is displayed in table format.
Beware to the status of an alarm:
Active (To column): Alarm is still active
Auto (ending column): Alarm stopped automatically. It means that alarm event is now ended.
Stop Acq. (ending column): Someone has stopped the recording activity
Restart (ending column): System has been rebooted by someone/something.
• Actual view of a device included into the alarm list
The user could be interested in having more and deep information about the actual situation of an
instrument with an active alarm that is included into the alarm list.
That’s why if you click on the description of the instrument itself the XWEB 500 will load a snapshot page
showing all the controller information.
• Print the alarm list
10/01/2006- 1592010900 Pag. 83 / 103