Instruction manual

XWEB 500 – rel.1.0
3.6.2 EXPORTING DATA
It is possible to export data in TXT format or in HTML one. The user has to chose “Save on disk” in the
“Action” menu. The standard window for graph is displayed. This time once all the wanted values are
checked, select which format you want to export (red rectangular area in the following image) and push
“Save” button.
3.6.3 DELETE DATA
To remove unwanted data, go to “data” -> “Graphs”. Here from the drop-down menu “Actions” choose
“cancel device data”. Beware, this will remove all data recorded from the controllers.
3.6.4 DISPLAY THE GRAPHS WITH LOCAL PC
You can also display the graphs without connecting to a remote XWEB 500. First you need to save locally a
graph(s) (see chapter §3.6.1Display the graphs “Save a graph format” section). If this is the first time you
want to display a graph locally, you have to install a special software. Insert the XWEB 500 cd-rom and go to
“Utilities” section. Here install “Graph viewer”.
First confirm the setup path and push “Start”.
78/103 10/01/2006 - 1592010900