Instruction manual

XWEB 500 – rel.1.0 –
If the instrument has not been already renamed the identification name is: “New_Model-name” where:
• “New” means that the name has been assigned automatically by the system;
• “Model-name” define the instrument model.
Instead of “xxx_New_Model” the user can insert the new appropriate name for this instrument.
3.3.6.2 ASSIGN THE NAME OF THE CONTROLLER
After selecting the device, click into the “Name” field. Insert the new name such as “Frozen food_001”.
Assign the proper sampling “Interval”, decide if you want to read and record data from this instrument by
checking/unchecking “Data Reading” and “Recording” boxes.
“Data Buffer” is an useful function that stores with the maximum speed available lots of data values
(regardless of sampling interval) when an alarm occurs. Ten minutes of data values before and 5 after
the alarm are recorded at maximum speed if “Data Buffer” box is checked. Finally if you need to
synchronize the on-board RTC of the controller, select RTC.
Click “Modify” now or at the end of the whole configuration.
10/01/2006- 1592010900 Pag. 49 / 103