Instruction manual

XWEB 500 – rel.1.0 –
unique definition. For instance all the temperature alarms that are not important can be defined by a typology
named as “Normal Alarm” while the temperature alarms of the frozen food can be identified by the typology
“Severe Alarm”.
The user can assign a typology name for the desired alarm event such as: High temperature, low
temperature, High or pressure, open door, compressor oil, Frozen food, etc…
The user can define the accuracy of the alarm description
Each typology can define the following:
• One of the alarm level previously defined to send the alarm.
• The Delay time that defines the minimum duration of alarm. The alarm must be longer to be
computed, otherwise the system will only record the event in the alarm historical list.
• The accumulation time that defines the time when the alarm will be sent. This time will be counted
only if the alarm lasts more than its delay time.
• For each alarm the user can insert the appropriate word(s) that represent(s) the alarm transmission.
• To inset a new Alarm typology
Click into the “Name” and insert the appropriate word(s) to describe the alarm typology.
Assign the alarm level procedure under “Level”.
Define the “Accumulation” time and the minimum activation time or “Delay” of the alarm.
Insert the appropriate message header into the corresponding fields.
• To modify the item
From “Selection” find the desired item.
Change the wrong description.
Click on “Modify”.
• To delete an item
Select the item to delete.
Click on “Cancel”.
• To delete all the items of the list
Click on “Cancel All”;
Confirm the operation if necessary. Wait the screen refresh.
• To reset the form
Click on “new”
3.3.4.5 QUEUED MESSAGES
The fax message can be sent to a back-up number (“Second fax number”). If the first number is engaged
or the line is unavailable, the system tries to send the message to the second fax number.
3.3.5 CALENDAR FUNCTION
The Calendar function is used to define if a function or a single event is active or not in the selected period of
time.
Therefore the Calendar is suitable to include/exclude certain period of the day, month or year when it has to
interact with some XWEB 500 procedures or for instance if the maintenance personnel is working on the unit.
The resource (or any programmed procedure that the XWEB 500 has to follows) related to a Calendar is
available “Enabled” only during the selected periods otherwise it is “Disabled” and it does not work.
10/01/2006- 1592010900 Pag. 43 / 103