Instruction manual

ManualsBrandsdixell ManualsComputer equipmentXWEB 3000

XWEB 500 – rel.1.0 –

This function allows you to define the functioning attributes and the working

features of the instruments themselves. The user is required to preventively

decide the list of these features.

Lately, when working with the Device configuration, each device can be easily

configured with these appropriate attributes. Some categories can be defined

also with “Default”. In this case the category is initially proposed as default during

the instrument configuration.

Click on “Configuration” “Category” roll-down menu.

3.3.2.1 DEVICE TIPOLOGY

This category defines the application at which the instruments belong to. Up to 5 different category can be

defined.

Eg: “Display cabinets” “Frozen food”, “Meat Room”, “Air Conditioning”, etc.

• To insert a new item

Click “News” and then into the

field “Name”. Insert the word or the

words that more represents the

application;

The most common category should be set as “Default” by clicking into its box;

Only one “Default” can be selected for each category;

Click “Insert” do include the new item into the list. Wait the screen refresh.

• To modify an existing item

Click on the name-field and modify it, then press “Modify”;

Click the “Set as Default ” if necessary;

• To delete one of the item of the list

Click on “Cancel”;

Confirm the operation if necessary. Wait the screen refresh.

• To reset all the items of the list

Click on “new”;

Wait the screen refresh.

3.3.2.2 RECORDING INTERVAL

Define the

recording

intervals of the

instruments to

log the data into

the archive.

Eg: “Standard = 15min.”, “Fast = 3min.”.

XWEB 500 can define different log intervals for different instruments when the log frequency is not the same

for all the instruments.