Instruction manual

XWEB 500 – rel.1.0 –
3
3
USING XWEB 500
USING XWEB 500
3.1 SYSTEM LOG-IN
Once the connection is activated, insert the IP number into the address bar of your browser.
The first window shows the Login with User Name and Password fields.
If the name and the password are correct the Home Page is loaded otherwise you must repeat the operation:
check your password (numbers, capital letters etc.). Remember that default Administrator can log to the unit
using:
• User name: Admin
• Password: Admin
Please consider to change the default password to increase system security (everybody can read this
manual and steals the admin account).
ATTENTION: After the first installation is complete, the XWEB 500 user database is made of 1
administrator and 2 users. Please go to Configuration -> Users roll-down section to ensure proper
security rights to each users.
3.2 HOME PAGE
When the Home Page appears the connection is effectively working.
Depending on the used password the User can operate on the server with or without limits decided by the
Administrator of the XWEB 500.
3.2.1 SYSTEM ACCESS
• The user defined as “Administrator” is the only one allowed to modify everything inside the Server. The
other users operate with their permission rights (see “§3.8 permissions”).
3.2.2 IDENTIFICATION / TIME
• Name
• Description
These items represent the name of server and its description.
• Time
Internal Real Time Clock of the server.
3.2.3 SERVER PROPERTY
•Server Linux version
•Resources Level of used memory
•IP adr Address of the server
•Data log: It shows the used amount of total memory available for storing data.
•Data reading Reading activity on RS 485 controllers.
•Recording Recording activity on RS 485 controllers.
•Alarm transmission Alarm transmission status
•Last connection
•Last users
10/01/2006- 1592010900 Pag. 27 / 103