Instruction manual

XWEB 500 – rel.1.0 –
2.2.6 SYSTEM SETUP
Click on “System setup” to adjust System name,
description, language, date/time and time-zone
format. They are important because the system
will use its time stamp to record and send alarm.
It is possible to change the default language: click
on “Import” and browse the cd-rom. All the
dictionary files are stored in the “Languages”
folder.
2.2.7 NETWORK SETUP
By clicking “Network Setup” is possible to
customize all network settings. The default IP
is 192.168.0.150, if you change it, please refer
to this new number each time you encounter
the default IP inside this manual.
The next window allows you to setup the
network. You can choose “No network”, it
means you will not be able to reach your
XWEB 500 using intranet/lan access. This is
an uncommon situation. On the other side if
you check the radio button “fixed network”, you
have to fill in the blank labels. We suggest you,
before proceeding, to contact your network
administrator to get help.
IP ADDRESS: you need this unique number to
identify your XWEB 500. There are 2 kind of IP
numbers: private and public ones. The first are
usually used to setup an intranet/lan where all
clients do not need to be reached from outside.
We can compare this situation to a close
environment: communication is possible only
among IPs belonging to this private range. For
example IP numbers 192.168.xxx.yyy define a
private network.
NETWORK MASK: is just like a filter, 255.255.255.0 means XWEB 500 can directly reaches only PCs
belonging to its own IP range. All other requests will be sent to a valid gateway.
GATEWAY ADDRESS: You have to compile this field with a valid gateway IP number. Gateway machines
are a kind of portal through which all data that can not directly reach the target IP, is sent.
10/01/2006- 1592010900 Pag. 23 / 103