Instruction manual

XWEB 500 – rel.1.0 –
far as firewall is concerned, add port 80 and port 22 to the allowed ports forwarding, of course all the TCP/IP
requests coming from the IP address of XWEB 500 must be allowed.
2.2.4 SYSTEM CONFIGURATION
As soon as the power supply cable is plugged in, the system starts loading.
The on-board display shows you the bootstrap procedure with a slide-bar
After the first loading of the operative system, the user is required to setup the XWEB 500.
The first window asks you to log-in to the system. Use Admin as “User name” and “Password”.
2.2.5 XWEB 500 SETUP
Click on “Configuration” -> “System” roll-down menu. This window will appear:
10/01/2006- 1592010900 Pag. 21 / 103