Instruction manual

XWEB 500 – rel.1.0
2.1.7.3 INTERNET CONNECTION
It is necessary a STATIC IP address for the XWEB 500 which is normally assigned by the Provider of your
internet services.
The Internet connection allows XWEB 500 to be reached from all PC-clients. Insert the net address assigned
by the administrator into the Browser address bar. Bookmark the address with personalised name for the
future connections.
Ask your provider for more details about the rent of a static IP.
This the internet system requirements for the best result:
• Wide band connection.
• At least 1 static IP addresses for the XWEB 500.
The internet connection is established through a device called Router that receives and sends the data as
interface between an Intranet and Internet. The Provider also assigns the address of the router that is called
IP WAN.
Remember that the default value of the IP of the XWEB 500 is: 192.168.0.150.
Depending on the contract the Provider can also supply the router, otherwise the user can buy it separately.
REMEMBER: ask qualified personnel for the router installation by using this information:
Used ports that are mapped to the LAN side:
•22 (used for SSH connection)
•80 (used for the http:// access)
•42 (tcp and udp) towards the name server you choose
•53 (tcp and udp) towards the name server you choose
The above ports are all related to the XWEB 500 IP address 192.168.0.150.
While the ports on the WAN side are:
•Telnet (to configure the router from a remote, also via Internet)
•http (To access the XWEB 500)
2.1.8 LOCAL CONNECTIVITY VIA A USB CABLE
It is normally used for the first setup of the unit. XWEB 500 is provided with the USB port for the PC
connection through a standard USB cable. XWEB can also work without local PC, therefore after the first
14/103 10/01/2006 - 1592010900