User manual

1592022700 User manual iCHILL 200CX Rel. 1.0 22/04/2009
Pg.6/114
1 GENERAL ADVICE
PLEASE READ BEFORE USING THIS MANUAL
• This manual is part of the product and should be kept near the instrument for easy and quick reference.
• The instrument shall not be used for purposes different from those described hereunder. It cannot be used as a safety device.
• Check the application limits before proceeding.
SAFETY PRECAUTIONS
• Check the supply voltage is correct before connecting the instrument.
• Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with
high atmospheric humidity to prevent formation of condensation
• Warning: disconnect all electrical connections before any kind of maintenance.
• The instrument must not be opened.
• In case of failure or faulty operation send the instrument back to the distributor or to “Dixell s.r.l.” (see address) with a detailed
description of the fault.
• Consider the maximum current which can be applied to each relay (see thechnical Data).
• Ensure that the wires for probes, loads and the power supply are separated and far enough from each other, without crossing or
intertwining.
• Fit the probe where it is not accessible by the end user.
• In case of applications in industrial environments, the use of mains filters (our mod. FT1) in parallel with inductive loads could be
useful.