User manual

1592022700 User manual iCHILL 200CX Rel. 1.0 22/04/2009
7 REMOTE TERMINAL
The iCHILL can be connected to a remote keyboard (max 2 remote keyboards).
The remote keyboard with probe on board can be used for the regulation of the machine.
The maximum length of the cable is 150mt (shielded cable is recommended).
Use the connection cable CAB/CJ30 (2x0.2 mm
2
) to interface the ichill connector to the shielded wire.
In case of communication problems (hardware problems or bad connection) the upper display shows “noL” (no link).
8 FIRST INSTALLING
8.1 ON BOARD CLOCK (OPTIONAL)
Giving power supply the bottom display shows “rtC” alternated to a temperature or pressure value: It is necessary to set the RTC
(Real time clock).
ATTENTION
The RTC function is an option and it is not possible to update the instrument It is necessary to order the instrument already
complete of this features.
With a prolunged power failure (several days) it is necessary to setup the clock again.
8.2 RTC SETUP
1. Push Menu key for 3 seconds until the bottom display shows “Hour” and the top display shows its value.
2. Push SET one time: the value is blinking.
3. Use the Up and Down keys to adjust it. Push SET one time to confirm.
4. Push up or down keys and repeat the operations 2. 3. and 4. for all the RTC parameters:
- Min: minutes (0÷60)
- UdAy: day of the week (Sun = Sunday, Mon =Monday, tuE =Tuesday, UEd = Wednesday, tHu = Thursday, Fri =Friday, SAt
=Saturday)
- dAy: day of the month (0÷31)
- MntH: month (1÷12)
- yEAr: year (00÷99)