User manual

1592022700 User manual iCHILL 200CX Rel. 1.0 22/04/2009
Pg.12/114
• Condenser probe temperature Cdt1 / pressure CdP1
Bottom display of the circuit 1
• Evaporator pressure probe LP1
Top display of the circuit 2:
Condenser probe temperature Cdt2 / pressure CdP2
Bottom display of the circuit 2
Evaporator pressure probe LP2
4.3 ICONS MEANING
ICON MEANING / FUNCTIONNING
°C -°F
BAR-PSI
Lighted when the display shows a temperature or pressure
Lighted when a compressor is activated
Blinking = when the delay of activation is running
Alarm: blinking in case of alarm
Lighted if anti freeze heaters/ integration heating / boiler are activated
Flow alarm/ (differential) pressure switch / supply fan thermal (air / air unit): is blinking if the configuration of the
digital input is active
Lighted when the bottom display shows the RTC
Lighted during the programming parameters if it is time based
Lighted in function menu when the display shows the defrost delay
Water pump: lighted if at least one pump is activated
Condenser fan: lighted if at least one fan is active
Lighted if Dynamic set point or Energy saving are active
Lighted during menu navigation
Lighted if auxiliary ouput is active
Lighted when the controller is ON
Lighted when the display shows probes values of circuit 1 or circuit 2
Lighted when the defrost is activated
Blinking during the counting of the interval between defrost