Technical data

1592022750 Quick reference guide IC 200CX Rel. 1.1 25/05/2009
16 INSTALLING AND MOUNTING
16.1 PANEL CUT- OUT
The instrument must be mounted on vertical panel, with panel cut-out 71x29mm, and fixed using the
special bracket supplied.
Avoid locations subject to heavy vibration, corrosive gases or excessive dirt. Ensure ventilation around
the instrument.
16.2 VERTICAL BOARDS VI620CX PANEL CUT-OUT
The remote terminals are for panel mounting, panel cut-out 72x56 mm, and screwed with two screws.
The IP65 can be reached with the gasket RGW-V (optional).