Technical data

Ichill 200CX EVO rev 1.1 14/11/2013
Pag. 17 of 151
• Leds 1 / 2 are blinking: the parameter can not be changed.
• All the leds are off: the parameter is available only in Pr3.
• Led 4 on: the parameter can be changed also in Pr2.
• Led 4 blinking: the parameter is visible also in Pr2 .
• Leds 3 / 4 on: the parameter is available in Pr2 and in Pr1.
• Leds 3 / 4 blinking: the parameter is visible in Pr1 and in Pr2.
• The MENU key allows to exit from a family to reselect another without exit the Pr2 level.
• The MENU key allows to pass to Pr1 starting from a family label.
• To exit completely the programming push SET + UP.
How to change a parameter value
Enter the programming
1. Push the SET + DOWN keys together for 3 seconds;
2. Select the parameter label with up and down keys;
3. Push SET to enter the parameter value;
4. Change the value with UP or DOWN keys;
5. Push “SET” to confirm, after some seconds the display shows the next parameter;
6. Exit: Push SET + UP together when a parameter label is displayed or wait 15seconds without pushing a
key.
NOTE: a new parameter value is confirmed also after the 15 seconds of timeout is expired (without pushing
SET key to confirm).
Change the Password value
Pr1 LEVEL
1) Enter Pr1 visibility level
2) Select a whatever parameter family.
3) Search “Pr1” label; push SET key to change the value that now is blinking.
4) Use the UP or DOWN key to insert the NEW PASSWORD value, then push SET to confirm the new
value.
5) Top display blinks for some seconds and then shows the next parameter.
6) Exit the programming pushing SET + UP together or wait the timeout.
Pr2 LEVEL
1. Enter Pr2 visibility level
2. Select a whatever parameter family
3. Search “Pr2” label; push SET key to change the value that now is blinking.
4. Use the UP or DOWN key to insert the NEW PASSWORD value, then push SET to confirm the new
value.
5. Top display blinks for some seconds and then shows the next parameter
6. Exit the programming pushing SET + UP together or wait the timeout.
Inside the Pr2 level it is possible to change also the Pr1 password.
Pr3 LEVEL