User`s manual

56
6) Maintenance
• Maintenance
-. Restart:
The system is restarted without changing any of the settings. Use this method if the unit is not
behaving as expected.
-. Reset:
The unit is restarted and most current settings are reset to factory default values. The settings
that are not affected are:
* the boot protocol (DHCP or static)
* the static IP address
* the default router
* the subnet mask
-. Default:
The default button should be used with caution. Pressing this will return all of the NVR's
settings to the factory default values (including the IP address).