User`s manual

When using the high-speed Internet with the telephone or cable network, users can operate the

Network Camera even on the floating IP environment in which IPs are changed at every access.

Users should receive an account and password by visiting a DDNS service like

http://www.dyndns.com/, or http://www.cctv-network.co.kr/.

-. Enable DDNS:

Check to get DDNS service to be available.

* DDNS Server: Select the DDNS server.

* Registered host: Enter an address of the DDNS server.

* Username: Enter an ID to access to the DDNS server.

* Password: Enter a password to be used for accessing the DDNS server.

* Confirm: Enter a password again to confirm it.

* Maximum time interval: Set a time interval to synchronize with the DDNS server. Select an

item in the interval drop-down list.

* Register local network IP address: Register a Network Video Server IP address to the

DDNS server

7) UPnP

The NVR includes support for UPnP™. UPnP™ is enabled by default, and the NVR then is automatically

detected by operating systems and clients that support this protocol.

Note: UPnP™ must be installed on your workstation if running Windows XP. To do this, open the

Control Panel from the Start Menu and select Add/Remove Programs. Select Add/Remove Windows

Components and open the Networking Services section. Click Details and then select UPnP™ as the

service to add.