User`s manual

33
The network camera provides access to H.264, and Motion JPEG video streams, and to the list of
available stream profiles. The NVR and clients can also access these video streams/images directly.
The number of profile depends on the kind of camera device.
-. Profile: Select a profile from the profile list. The NVR displays live video based on the settings
of the selected profile. Each profile consists of stream characters, describing its audio and video
encoder, PTZ control.
* Video Source: Select the desired video source from the list of video sources supported in the
device.
* Video Encoder: Select a video encoder configuration.
* Audio Source: Select a desired audio source from the list of audio sources supported in the device.
When Not Use is selected, audio monitoring and recording for the device will not be supported.
* Audio Encoder: Select an audio encoder configuration.
* PTZ: Select a PTZ setting. When Not Use is selected, PTZ control of the device will not be
supported.
-. Video: Set up an encoder for video. Select a video source to configure in the Source list.
Clicking the Video button allows you to configure the details of the selected video encoder
configuration.
* Token: The number of tokens.
* Name: Assign a name to the selected video encoder.
* Codec: Select a video compression codec.
* Resolution: Select a video resolution.
* Quality: Set the video quality.
* Bitrate: Enter the maximum bit rate. You can control the network bandwidth by limiting the
bit rate depending on the network traffic.
* Framerate: Select a maximum frame rate.