User`s manual

Note: Easy Install is inactivated in factory default.

[Step3]

The NVR detects all of IP cameras connected in the intranet and displays in the camera list. When

you select a camera channel in the list, the basic information is displayed in Connection Setup

section. Configure IP camera settings you want to change. Click Save button to save settings

changed.

You can also search all cameras connected in the internet besides the intranet. Click the Search

Cameras button and the Camera Discovery window appears. Select one of three in Search Mode

and click the Start Search button.

Note: The HNR_P116 supports only for cameras which use the ONVIF Conformance protocol.

• Search Mode:

- Auto Search (LAN): Lists cameras in a LAN environment.

- IP Search (Single): Allows you to enter the IP address of a device. You can search more

than one device at a time by entering a range of IP addresses.

- Domain Name Search: Allows you to enter the domain name registered on a DDNS

server if the camera uses the DDNS function.