User`s manual

Note: For more information, refer to the Smart Manger User’s Manual.

2.3 Connecting to the Website

The Network Video Recorder supports the operation through the network. When the NVR is first

connected to the network, it has no IP address. So, it is necessary to allocate an IP address to the

device with the “Smart Manager” utility on the CD.

Note: Factory Default IP address is 192.168.100.220

1. Start a browser (Internet Explorer).

2. Enter the IP address or host name of the Network Video Recorder in the Location/Address field of

your browser. The HNR-P116 installs and executes the client software automatically after

installing ActiveX.

3. If the NVR has not been configured, Setup Wizard will be shown. This drastically reduces the

time required for system installation. Images from cameras are connected and recorded

automatically to the NVR, so that you can start monitoring and recording instantly.

Note: Setup Wizard will be shown only in factory default state.

Follow the instructions of the wizard to complete the system setup.

[Step1]