User`s manual

has a grounding pin. Use only a grounding-type power outlet. Do not destroy the plug even

though you are not able to insert the plug into the outlet. Do not overload wall outlets and

extension cords

• Factory Reset

The NVR has a Factory Reset switch to the left of the LED indicators on the front panel. This

switch will only be used on the rare occasions that you want to return all the settings to the

original factory settings.

To reset the unit, you will need to follow steps:

1. Press the Factory Reset button more than 5 seconds while the NVR is operating.

2. While the NVR is initializing, the alarm LED will blink.

3. After initializing, the NVR will restart.

Caution: When using the Factory Reset, you will lose any settings you have saved.

• Configuration

1. Standalone Configuration.

Note: IP cameras can be connected in the local network or in the internet, but Client PC

must be connected in the internet port. For the best network bandwidth, it’s is