Specifications

- 76 -
3 Motion Setup
Enable
Check this item when using the motion information.
Sensitivity
This sets up the sensitivity for the motion detection.
Motion dwelling time
This sets up the event dwelling time when a motion occurs. This can
be set in the range of 0 ~ 6 seconds. When an event occurs, the
motion icon at the upper right blinks in red for the preset time period.
When another motion occurs during the motion event, the dwelling
time is extended on the basis of the occurring time of the second
event.
Enable down FPS
This feature decreases frame rate to about 1 FPS when no motion
event occurs, while operates with the frame rate set in '5.7.1 Setting up
Network Cameras - 1 Video Setup' section when a motion event
occurs.
Motion information is processed by splitting the screen into 64 areas.
Each area can be selected by clicking with the mouse, and green point
shown in the selected area. The area which uses the motion information
as an event is shown in blue, while the area which does not use the
information is indicated empty.