Specifications

OSD [On Screen Display] Menu(*Not Support)
Users can execute setup while seeing the PTZ camera menu on the
common CRT screen.
- 68 -
7 Pattern
This function can memorize all the paths of Pan/Tilt/Zoom operations
for a defined time, and import their saved patterns to display on the
screen again as they are.
8 Setup PTZ
Move to the page that users can set up the PTZ camera immediately.
For its setting, please see the 9 PTZ item of the 5.7.1 Setting up
Network Cameras.
1 Used to move the menu.
2 Used to increase and decrease various setting values.
3 Execute the 'Menu', 'Esc', 'Home' and 'CTRL' buttons of the PTZ
camera keyboard.
4 Move to the setup screen for certain functions immediately.
5 Preset
Users can save a position and zoom value of a certain monitored
point into an address by pressing the " Save " button. Then, import
such value and press the " Go " button to move to the saved
coordinate immediately.
Refer to the user's manual corresponding to the PTZ camera or contact
with the dealer for details on how to use the PTZ camera.