Specifications

- 67 -
5.5.7 Operating PTZ Camera
PTZ Menu(*Not Support)
You can control and set up PTZ cameras with this function.
1 Pan/Tilt Control(*Not Support)
This is a button to adjust the PTZ camera in the four directions.
2 FOCUS/IRIS/ZOOM Control
This button is for focus/iris/zoom control.
3 Pan/tilt Speed Control
It sets a speed when adjusting the PTZ camera.
The higher a value is, the faster a speed will be.
4 Preset
Users can save a position and zoom value of a certain monitored
point into an address by pressing the " Save " button. Then, import
such value and press the " Go " button to move to the saved
coordinate immediately.
5 Auto Scan
Enter a coordinate value of the start and end points, and set each
zoom value to execute the Auto Scan from the start to end point
values.
6 Tour
Execute an automatic monitoring mode with the combination of
Preset and Auto scan values.