Specifications

- 60 -
5.5 Real-time Observation
If the Network Camera is connected properly, video is shown on the screen.
If video is not shown on the screen, check the registration information of the
Network Camera and make sure that accurate values are entered. If video
is now shown even with the accurate values, contact with the installation
dealer for solving the problem.
1 Camera Name
This is a name that users have set to distinguish network equipment.
2 Motion Event
This motion icon turns on and off, if a motion event occurs.
3 Alarm Event
This alarm icon turns on and off, if an alarm event occurs.
4 Freeze
Stop a real-time monitoring screen temporarily. Once pressed again, it
returns to a real-time screen.
5 Disconnection
Disconnect the network equipment under real-time monitoring, and stop
its real-time monitoring.
6 Recording
Record an image under real-time monitoring to the HDD of PC.
7 Audio Control (*not support.)
If users are to control the volume of a microphone and speaker
connected to a user PC, they should adjust the user PC volume
regardless of the microphone and speaker volume control set in
Network Cameras.