Specifications

- 58 -
5.4 Network Camera Management
5.4.1 Registering Network Camera
1 Group Registration
Before registering Network Cameras,
register the group first.
Enter a group name to use, and press
the Add button to register a group to the
left window.
*Enter a setting value correctly after checking it through a web browser.
If an IP address (or domain address), RTSP Port and HTTP Port values
are entered wrong, it cannot be connected to the network equipment
concerned. (Refer to '6.4 Network Camera IP Assignment' section for
detailed information.) * Default Port Number is '7070'.
HTTP tunnel mode
When the screen is not indicated, check.
(Notice: "unicast mode" only it is applied.)
2 Network Equipment Registration
Register a Network Camera to be
operated to the registered group.
Click a group on the left window, enter a
network equipment name to be used, IP
address (or domain address), RTSP
Port, HTTP Port, etc. into the entry
window, and press the Add button to
register a network equipment to group.