Specifications

- 47 -
Enable multi stream
Check it to send data for the purpose of saving them into an external
extension storage right after the Network Camera operates.
- Send to secondary client ip : Enter an IP address of the external
extension storage.
- Use RTP destination port : Enter a Port number of the external
extension storage. The Port number to be
used is [1024 ~ 65532].
- Frame rate : Indicate a frame rate that is sent to the external extension
storage when the multi stream works.
Once the multi stream function is checked, the MPEG profile setting will
be changed to the Advanced Simple Profile.
RTSP/RTP settings
Perform a multicast setting to send a video and audio to multiple users.
(Up to 10 users).
RTP destination IP
Disable Multicast : Do no use the multicast.
Enable Multicast : Use the multicast.
- Multicast destination IP : Enter an IP between 224.0.0.0 and
239.255.255.255. Although it is empty,
an IP will be entered automatically.
- RTP port : Enter a value between 1024 and 65532.
- RTP TTL : Enter a value between 1 and 255. If a network status is
smooth, enter a lower value. On the other hand, if a network
status is poor, enter a higher value. When there are many
Network Camera or users, a higher value may cause a
heavy load to the network. For a detailed setting, please
consult with a network manager.