Specifications

- 46 -
RTP Setting
Have a setting for sending and receiving an audio or video on a
real-time basis.
Stream RTP after Network Camera start-up
Enter a destination IP and Port to send movie data automatically through
the RTP while the Network Camera has booting.
Send to DHCP server IP: Send movie data to the DHCP server.
Send to (Client) IP: Send movie data to other certain destination
addresses.
Use RTP destination Port: Available from 1024 to 65532, and the
default is 5000.
Do not send: Do not send a stream to the FTP until it is requested
from a client.