Specifications

- 34 -
Frame rate
Upon the real-time play, users should select a frame refresh
rate per second. If the rate is high, the image will become
smooth. On the other hand, if the rate is low, the image will not
be natural but it can reduce a network load.
Bit-rate control
-Variable bit rate (VBR): It refers to the type of using a variable
bit rate (VBR). Increase a bit rate for the image with much
motion, and decrease a bit rate for the image with little motion.
The basic setting value is a VBR type.
-Constant bit rate (CBR): Using a constant bit rate (CBR) may
guarantee a stable play. However, if a large amount of data is
not required, it may cause the waste of a transmission rate. If a
large amount of data is required, it may cause the image quality
to be decreased.
Profile
SP (Simple Profile) is available up to the CIF resolution and
384kbit/s.
ASP (Advanced Simple Profile) is available up to the 4CIF
resolution and 8000kbit/s.
GOV size
Enter the GOV (group of VOP) size. If users want to have a high
quality of fast image one by one, please decrease the value.
For the purpose of general monitoring, please do not change a
basic value. Such act may cause a problem to the system
performance. For the details of GOV setting, please contact
the service center.
MPEG4 Video Stream