User's Guide

17 September 2021

NG Series Industrial Wireless Gateway User Guide

DIVIGRAPH

Doc No. 20DD1980

Revision 4

Figure 2: Pole mounting

Surface Mounting

The mounting main bracket can be attached directly to a suitable surface such as a wall or bulkhead using

four appropriate M8 (or 5/16”) fasteners (see Figure 3). Ensure that the mounting surface is able to

support the weight of the gateway as well as any additional strain applied by the cables connected to the

gateway.

Although not required, NG Series Industrial Wireless Gateways can be mounted directly into instrument

panels or enclosures using the supplied mounting accessories.

Figure 3: Surface mounting