User's Guide

17 September 2021

NG Series Industrial Wireless Gateway User Guide

DIVIGRAPH

Doc No. 20DD1980

Revision 4

Deploy Gateway

The NG Series Industrial Wireless Gateways must be installed in accordance with relevant site standards

and regulations.

• All hazardous location installations MUST be performed by a suitably qualified competent

person.

• RF antenna installations should be completed by a suitably qualified competent person.

! WARNING

HAZARDOUS ENVIRONMENT

RISK OF EXPLOSIVE ATMOSPHERE.

The connectors to the equipment may not be connected or disconnected when

energized.

Mounting

Mounting accessories allow for limited adjustments for either pole or surface mounted installations. For

ease of installation, the gateway with attached mounting flanges can be mounted after the main bracket

has been installed. Provide enough clearance around the main bracket to allow for the gateway to be

attached and cables connected.

Pole Mounting

Mount NG Series Industrial Wireless Gateways to either a vertical or horizontal pole using the supplied

mounting accessories. The mounting main bracket is attached to the pole using the supplied mounting

support bracket and fasteners (see Figure 2).