User's Guide

17 September 2021

NG Series Industrial Wireless Gateway User Guide

DIVIGRAPH

Doc No. 20DD1980

Revision 4

Provision Field Devices (ISA100)

The NG Series Industrial Wireless Gateway does not currently support OTA provisioning. Refer to the VP

Series 2000 User Guide (document EVR-VPXDOC-0036) to manually provision compatible VP Series 2000

ISA100 field devices.

Before deploying VP Series 2000 ISA100 field devices, we recommend you provision each device to join

your network. Depending on the number of field devices and their current sleep state, provisioning can take

up to several hours.

When you provision the device, you:

• Set the network ID to match the gateway network ID.

• Set the network join key to match the gateway network join key.

Configure Field Devices

Once VP Series 2000 field devices have joined the network, they can be configured using the NG Series

Industrial Wireless Gateway web interface.

You can configure these options:

• Tag (up to 16 Characters)

• Role (IO (Default), Router and Router IO)

To configure the device Tag:

• Select “Network” > relevant device in the device list.

• Expand “Device Information”.

• Change the “Device Tag” as required.

To configure the device Role (ISA100):

• Select “Network” [device name].

• Expand “Device Role”.

• Change the “Device Role” as required.

To implement changes, you must reboot the devices. For details, see Reboot Field Devices.