User's Guide

17 September 2021

NG Series Industrial Wireless Gateway User Guide

DIVIGRAPH

Doc No. 20DD1980

Revision 4

Set IPv4 TCP/IP Address

To prevent plant network conflicts, we recommend you change the NG Series Industrial Wireless Gateway

IPv4 TCP/IP address.

To change the TCP/IP address:

• Select “Network” > “System Manager”.

• Expand System Manager “Provision”.

• Change the IPv4 Address, Gateway (Default Gateway) and Mask (Subnet Mask) values as

required.

Have your plant network administrator allocate a dedicated static IPv4 plant network address or ensure

that you assign an unused TCP/IP IPv4 address.

Set Network ID

To prevent wireless network conflicts, we recommend you change the NG Series Industrial Wireless

Gateway network ID.

To change the device network ID:

• Select “Network” > “System Manager”.

• Expand System Manager “Provision”.

• Change the “Network ID” as required.

You must use an unused ISA100 network ID. Consult with your plant ISA100 wireless network

administrator as needed.

Set Join Key (ISA100)

For security purposes, we recommend you change the NG Series Industrial Wireless Gateway join key.

To change the join key:

• Select “Network” > “System Manager”.

• Expand System Manager “Provision”.

• Change the “Join Key” as required.