User's Guide

17 September 2021

NG Series Industrial Wireless Gateway User Guide

DIVIGRAPH

Doc No. 20DD1980

Revision 4

4. Click on “OK” to upload the file.

5. After the upload is complete, click on “Activate Modbus” to apply the configuration.

For more details about TSAP ID, Object ID, Attribute ID, Index 1, Index 2 values, see the VP Series

2000 User Guide (document EVR-VPXDOC-0036).

The current Modbus configuration file can be downloaded by clicking on “Download”.

Change Password

The Change Password function allows the user to change the NG Series Industrial Wireless Gateway

password.

Currently the NG Series Industrial Wireless Gateway only supports one user (the admin user) with access

to all operations on the NG Series Industrial Wireless Gateway.

Restart

The soft restart allows a software restart to be initiated on the gateway. It is a faster option for

reinitialization of the gateway. The Power Cycle option will reinitialize the hardware of the gateway and

will reliably restore the device to a well initialized state.

Logout

Once a user has completed any configuration or validation of the network using the NG Series Industrial

Wireless Gateway, they should use the Logout function to prevent unauthorized changes to the system.