User's Guide
Table Of Contents
- 1 Introduction
- 2 References
- 3 Terms and Definitions
- 4 Support
- 5 Hazardous Location Requirements
- 6 Operating Conditions
- 7 General Safety
- 8 Radio and Electromagnetic Compatibility
- 9 VP Series 2000 Components
- 10 ISA100.11a Provisioning
- 11 Hardware Installation
- 12 Configuration
- 13 Operation
- 14 Maintenance
- 15 Security Hardening Guidelines
EVR-VPXDOC-0036 VP Series 2000 User Guide
Version 1.09
Proprietary & Confidential – Copyright © 2020 Divigraph (Pty) Ltd. All Rights Reserved
Page 9 / 36
OPC
OLE for Process Control
OTA
Over the Air
RF
Radio Frequency
TIL
Technical Information Letter
USB
Universal Serial Bus
WCI
Wireless Conformance Institute
WSN
Wireless Sensor Network
Table 1 - Abbreviation Definitions
3.2 Terminology
Access Point
A device that provides a physical interface between a wireless network and
gateway.
Field Device
A node that has I/O or routing capabilities or both.
Gateway
A device that provides a link between Ethernet and other types of networks
such as ISA100.11a.
Modbus RTU
Serial Communication based Modbus Protocol.
Modbus TCP
TCP based Modbus client/server Protocol.
Node
An element of a wireless network e.g. a FD or AP.
OPC
A generic method of publishing field device data for use by measurement,
automation and control systems.
OPC DA
OPC Data Access - a simple, platform dependant OPC protocol.
OPC UA
OPC Unified Architecture - a platform independent OPC protocol.
Table 2 - Terminology and Definitions
4 Support
For additional support, contact:
Divigraph (Pty) Ltd
2G Matix Build, Bridgeway Road
Cape Town
7441
South Africa
www.divigraph.com