User's Guide
Table Of Contents
- 1 Introduction
- 2 References
- 3 Terms and Definitions
- 4 Support
- 5 Hazardous Location Requirements
- 6 Operating Conditions
- 7 General Safety
- 8 Radio and Electromagnetic Compatibility
- 9 VP Series 2000 Components
- 10 ISA100.11a Provisioning
- 11 Hardware Installation
- 12 Configuration
- 13 Operation
- 14 Maintenance
- 15 Security Hardening Guidelines
EVR-VPXDOC-0036 VP Series 2000 User Guide
Version 1.09
Proprietary & Confidential - Copyright © 2018 Divigraph (Pty) Ltd. All Rights Reserved
Page 21 / 36
9.5 Software
VP Series 2000 devices can be configured, provisioned and firmware updates can be applied using
the VP Series 2000 software.
Refer to the VP Series 2000 Software User Guide for additional information.
9.6 Configuration Interface
An USB configuration interface is used to interface VP Series 2000 devices with the VP Series 2000
software.
Figure 14 - VP Series 2000 - USB Configuration Interface
Note!
Only use the supplied Identiv CLOUD 3700 F USB interface. Refer to the VP Series 2000
product data sheet for ordering information.
Refer to the product data sheet for USB configuration interface ordering information.