User's Guide
Table Of Contents
- 1 Introduction
- 2 References
- 3 Terms and Definitions
- 4 Support
- 5 Hazardous Location Requirements
- 6 Operating Conditions
- 7 General Safety
- 8 Radio and Electromagnetic Compatibility
- 9 VP Series 2000 Components
- 10 ISA100.11a Provisioning
- 11 Hardware Installation
- 12 Configuration
- 13 Operation
- 14 Maintenance
- 15 Security Hardening Guidelines
EVR-VPXDOC-0036 VP Series 2000 User Guide
Version 1.09
Proprietary & Confidential – Copyright © 2020 Divigraph (Pty) Ltd. All Rights Reserved
Page 19 / 36
9.3 Mounting Adaptors
Various mounting options can be used when installing VP Series 2000 devices. In some cases
mounting adaptors may be required to achieve the most effective mount. Mounting adaptors include:
Figure 4 - Mounting Adaptor - M6
Figure 5 - Mounting Adaptor - M8
Figure 6 - Mounting Adaptor - Mounting Pad
Figure 7 - Mounting Adaptor - 1/4-28 UNF
Figure 8 - Mounting Adaptor - 10-32 UNF
Figure 9 - Mounting Adaptor - 3/8-24 UNF
Figure 10 - Mounting Adaptor - Tri-Axial Alignment Mount
Refer to the product data sheet for mounting adaptor ordering information.