User's Guide

EVR-VPXDOC-0036 VP Series 2000 User Guide
Version 1.09
Proprietary & Confidential – Copyright © 2020 Divigraph (Pty) Ltd. All Rights Reserved
Page 13 / 36
The product makes use of a Lithium cell which shall be disposed of by the end user in accordance
with applicable statutory and regulatory as well as site specific safety requirements. Do not crush the
product as this may cause the Lithium cell to rupture.
7.5 Installation, Operation and Maintenance
Refer and adhere to applicable statutory and regulatory as well as site specific safety requirements
when installing, operating or maintaining the product.
Installations and maintenance tasks performed in potentially hazardous areas must be performed only
after the area has been verified to be free of hazardous materials, atmospheres and conditions.
7.5.1 Installation
The original supplier takes no responsibility for any loss or damage caused by not adhering to
applicable safety requirements, the installation of the product in any manner other than described in
this document or due to incorrect or negligent installation as per the methods described in this
document and associated documents.
7.5.2 Operation
Routine inspection procedures should be followed to ensure the continued safe operation of the
product. If any damage is observed during routine inspections, the product should be removed for
maintenance as soon as possible. If the product is used in a hazardous area, it should be removed
without delay if damaged.
Warning!
 Do not operate a damaged product in a hazardous area.
 Report any leakage from the product to the appropriate responsible person as soon as
possible and follow applicable hazardous material procedures.
 The protection provided by the equipment may be impaired if the equipment is used in a
manner not specified by the manufacturer.
7.5.3 Maintenance
The product requires minimal routine operational maintenance other than cleaning the area around
the product to ensure safe and reliable operation as well as to prolong the service life of the product. If
the Lithium cell in the product requires replacement, follow applicable hazardous material procedures
to replace and dispose of it.
7.6 Disposal
Customers or third parties who are not member states of the European Union are solely responsible
for diligent product disposal at the end of its useful life. No person, firm, corporation, association or
agency shall dispose of the product in such a way that is in violation of any applicable international,
federal, state or local regulations. The original supplier is not responsible for product disposal at the
end of its useful life.
Warning!
 Ensure that the Lithium cell has been removed from the product prior to disposal.