User's Guide

EVR-VPXDOC-0036 VP Series 2000 User Guide
Version 1.09
Proprietary & Confidential – Copyright © 2020 Divigraph (Pty) Ltd. All Rights Reserved
Page 10 / 36
5 Hazardous Location Requirements
The information in Section 5 is identical to document DSDVP001. No changes are allowed in this
section without prior approval from the notified body.
5.1 Additional Warnings
The following warnings apply in addition to any marking on the equipment.
WARNING – POTENTIAL ELECTROSTATIC CHARGING HAZARD.
The equipment shall only be cleaned with a damp cloth when deployed in a hazardous area.
WARNING – USE ONLY ONE OF THE FOLLOWING BATTERIES
XenoEnergy XL-205F, Tadiran TL-5930, Tadiran SL-2780 or Tadiran TLH-5930
WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT
5.1 Avertissements supplémentaires
Les avertissements suivantes doivent etre appliquer avec les autres instructions marquees sur
l’equipememt.
AVERTISSEMENT- RISQUE - POSSIBILITE DE CHARGEMENT ELECTROSTATIQUE
L’equipement doit etre nettoyer avec une toile humide dans un environment danger.
AVERTISSEMENT- UTILISEZ UN DE CE GENRE DE BATTERIE UNIQUEMENT.
Xeno XL-205F, Tadiran TL-5930, Tadiran SL-2780 ou Tadiran TLH-5930
AVERTISSEMENT- NE PAS OUVRIR QUAND UN ATMOSPHÈRE EXPLOSIVE EST PRESENT.
5.2 Approved Electrical Cells
Only the cells listed in Table 3 are approved for use with the equipment. The use of any battery or cell
other than the type listed will void the safety rating and present a significant safety hazard.
Cell Part Number
Manufacturer
XL-205F
XenoEnergy
TL-5930
Tadiran Batteries
SL-2780
Tadiran Batteries
TLH-5930
Tadiran Batteries
Table 3: Approved Cells
5.3 Ambient Temperature Rating
When operating in a hazardous atmosphere, the ambient temperature rating of the equipment
depends on the electrical cell installed. Refer to Table 4 for the applicable ambient temperature
ratings.