Specification

Page 1 of 1
Condensate Detection Switches
UA-1
Universal Alarm
A universal low-voltage alarm that can indicate possible system trouble. Use
with the Wet Switch, SOS, Condensate Cop, CP-22 (all types) and all float
switches on 24VAC control circuits. If an alarm condition exists, the homeowner
can turn the alarm off with a in.silencein. button until service is obtained,
however a red trouble LED will remain lit. Also features: easy 2 wire connection,
label to print contractor information, and low current draw. Actuates at greater
than 18V to prevent any false alarms due to low voltage.
Includes 2 wire nuts, a sheet metal screw, and double sided tape for convenient
installation options. Also includes instructions for wiring normally open switch
systems (for the CP-22 or other condensate pumps).
UOM
Order
Multiple
List Price
Catalog No.
Description
1 $27.84EA
Universal Alarm for 24VACUA-1
WS-1
Wet Switch® Flood Detector
A solid state control designed to help prevent flooding, damage to carpets,
walls, furniture, ceilings, etc. Now has a built-in test and reset button for easier
installation. Turns system off when detecting moisture due to condensate or
drain leaks. One or two drops will cause Wet Switch to turn off a unit, alerting a
serviceman to a moisture problem. A lit LED indicates the Wet Switch is
activated and has turned the unit off. Reset simply by drying the absorbent pad
with a paper towel and pressing the reset switch. Connects to 24 VAC. More
than one unit may be connected to a system. 2 amp contact rating. Simple 5
wire installation. Sales displays available. ETL Listed File Number 3146992
UOM
Order
Multiple
List Price
Catalog No.
Description
1 $122.00EA
Wet Switch Flood DetectorWS-1
February 2017
http://media.diversitech.com/doc/DOC04048.pdf
Product Bulletin
DOC04048