Components
Page 1 of 6
Wire/Cable Ties, Mounts, Clamps
These wire ties are perfect for securing wires. You can choose from an assortment of sizes.
Black Nylon Wire Ties
WTB11
Description UOM
Order
Multiple
Catalog No.
1PKWTB11C Black wire ties, 11in. nylon, 50 tensile strength, 100pk
Fittings
A unique drain line for mini-split units. This large diameter drain line is typical for mini-split
installations. Furnished in 160 feet lengths with cut marks every 3.28 feet.
Mini Split Condensate Drain
230-DL16
Description UOM
Order
Multiple
Catalog No.
1EA230-DL16 5/8in. ID Mini-Split Drain Line, 160ft. roll
1EA230-DL16-20 Mini-Split DL, 5/8in.ID - 20ft
1EA230-DL20 3/4in. ID Mini-Split Drain Line, 160ft. roll
Adjustable flat bends flex from 45 to 90 degrees and make it easy to route the SpeediChannel™
around an obstacle. Each adjustable bend is individually packed and includes stainless steel
screws.
Adjustable Flat Bend
230-AFB3
Description UOM
Order
Multiple
Catalog No.
10EA230-AFB3 3in. Adjustable Flat Bend
10EA230-AFB4 4in. Adjustable Flat Bend
Roof entrance adapters for linesets are the ultimate solution for a professional flat roof
installation. Manufactured from UV weather resistant plastics. ,The Roof Inlet body part is
equipped with a slope avoiding possible damage to the insulation and preventing kinks into the
copper tubes. The Roof Inlet base holes allow a steady fixation (depending on the roof surface
type and composition).
Roof Inlet
230-INJ465
Description UOM
Order
Multiple
Catalog No.
1EA230-INJ462 SpeediChannel™ Roof Inlet – 10in.
1EA230-INJ465 SpeediChannel™ Roof Inlet – 5in.
Product Bulletin
DOC04045