Safety Data Guide

MATERIAL SAFETY DATA SHEET
Date Prepared: 1/15/2011
J-B Weld Co. Weld/Professional (Resin) MSDS Page 3 of 6
FIREFIGHTING INSTRUCTIONS:
Respiratory equipment should be worn to avoid inhalation of concentrated vapors. Water should
not be used except as fog to keep nearby containers cool. Fire Fighters and others who may be
exposed to the products of combustion should be equipped with NIOSH approved positive
pressure self-contained breathing apparatus (SCBA) and full protective clothing.
SECTION 6 – Accidental Release Measures
SPILLS:
Dispose of in normal manner in accordance to all applicable state, federal, and local laws. Not a
hazardous waste.
SECTION 7 – Handling and Storage
HANDLING:
No special precautions needed.
Personal hygiene- Wash thoroughly after handling, especially before eating, drinking, smoking,
and using restroom facilities. Professionally launder contaminated clothing before use.
Empty container precautions- Do not reuse empty containers for food, clothing, or products for
human or animal consumption, or where skin contact can occur.
STORAGE:
Temperature - Less than 90 F.
Conditions - Store in cool, dry, well-ventilated area.
SECTION 8 – Exposure Controls and Personal Protection
ENGINEERING CONTROLS:
Local exhaust: Use to keep exposures below recommendations.
Use if material is heated above 100 F.
RESPIRATORY PROTECTION:
None required in a well-ventilated area.
SKIN PROTECTION:
Appropriate impervious gloves. Because a variety of protective gloves exist, consult glove
manufacturer to determine the proper type for the specific operation.
EYE PROTECTION:
Safety glasses or goggles.