Safety Data Guide

MATERIAL SAFETY DATA SHEET
Date Prepared: 1/15/2011
J-B Weld Co. Weld/Professional (Hardener) MSDS Page 2 of 6
SECTION 3 – Composition, Information or Ingredients
Component/Exposure Limits CAS# % by Wt.
---------------------------------------------------------------------------------------------------------------------
Polyamide 135108-88-2 15% to 40%
Oral LD(50) Rat: >500 mg/kg
Inhalation LC(50) (1hr) Rat: >20 mg/l
Skin LD(50) Rabbit: >2000 mg/kg
Polyamide Resin 68410-23-1 15% to 40%
Eye irritation Rabbit: 75.7 (scale 0-110)
Oral LD(50) Rat : >8.0 g/kg
Skin Irritation Rabbit: 3.0 (Scale 0-8)
Triethylenediamine 280-57-9 1% to 5%
ORAL: LD50 3200 mg/kg (Rat)
INHALATION: LC50 (1 h) >10.1 mg/l
SKIN: LD50 >2,000 mg/kg (Rabbit)
2,4,6-TRIS(DIMETHYLAMINO)METHYL PHENOL 90-72-2 1% to 5%
SKIN IRRITATION: 8 (scale 0-8) (rabbit)
ORAL LD(50): 1653 mg/kg (rat)
I
NHALATION LC(50): >0.5 mg/L (rat)
EYE IRRITATION: 110 (scale 0-110) (rabbit)
DOT CORROSIVITY: neg. (rabbit)
SECTION 4 – First Aid Measures
EYES:
Flush eyes thoroughly with water for several minutes. If effects occur, consult a physician,
preferably an ophthalmologist.
SKIN: Wash skin with plenty of soap and water.
INGESTION: No emergency medical treatment necessary.
INHALATION: N/A
NOTE TO PHYSICIANS: Consider additional thorough skin wash with mild, nonabrasive soap
and plenty of warm water for at least fifteen minutes.