Product Overview

Specications
Nitrogen
Purge Tool
Nitrogen Purge Tool
The Nitrogen Purge Tool is a quick and
easy way to purge copper pipes with
nitrogen. Then, with a turn of the dial,
quickly switch to a very low ow of
nitrogen to properly braze the copper. It
has a durable aluminum design so
you can just throw it into your tool bag
when you are done.
25-35 scfh (standard cubic feet per hour)
19 - 23 LPM (.03 dia. Orice)
3-6 scfh
2-3 LPM (.01 dia. orice) @ 56-60 psi
regulator pressure
The purge valve is not a regulator and
therefore the output pressure will equal
the input pressure when the outlet is
blocked. It is not intended to be used with
the outlet blocked. The user should not
weld a completely closed loop as the
pressure will build. We recommend
removing the schrader valve and letting it
vent.
50 psi
200 psi
¼” male SAE are outlet
¼” swivel female SAE are inlet
The thread size is 7/16” - 20
Product
Application
Purge Flow Rate
Braze Flow Rate
Inlet Pressure
for Proper Flow
Rates
Maximum
Pressure
Other
TECHNICAL DATA SHEET