Brochure

ManualsBrandsDiversiTech ManualsA/C Disconnects and Surge Protectors60A Fused A/C Disconnect w/ Side Open (240V)

FEATURES AND BENEFITS

1. Fuses install into pull-out handle

2. Line, load, and ground terminals

aligned for easy hook up with

heavy wires

3. Reversible side-opening door

4. Indicator lights for blown fuses

5. Full dead front

6. Folding pivot locking tab

7. Knockouts accommodate three

sizes (1/2”, 3/4”, and 1” )

8. Rear entry knockouts

9. Heavy gage steel case

10. Standard 1/4” head screw on

dead front

11. Large internal wiring space

FUSES INSTALL INTO

PULL-OUT HANDLE

The DiversiTech disconnect switch

is available in two versions – fusible

and non-fusible. On the fusible

configuration, the pull-out handle

also functions as a removable fuse

holder. This feature permits easy

removal and replacement of fuses.

Rather than requiring a fuse

puller to reach inside the disconnect switch and remove the blown fuses,

one can easily

change the fuses with the fuse holder removed from the

disconnect switch.

INDICATOR LIGHT FOR BLOWN FUSE

MOUNTING AND INLINE WIRING

A unique feature to the DiversiTech

disconnect switch is the design of

wiring terminals inline. This straight-

line arrangement provides for quick

and easy wire connection — no need

cut the connection wires to different

lengths. All wires are easily installed

without unnecessary bending or twisting.

The unique reversible

side opening door

provides for easy field

change from left-hand

hinge to right-hand

hinge. The standard

left-hand hinge is

adequate for most all

installations except for

tight, inside, right-hand

corners. In these

instances, simply

REVERSIBLE SIDE

OPENING DOOR

The fusible disconnect switch has an

indicator light for fuse condition. When

a fuse is blown, the red indicator light

illuminates to show not only that a fuse

is bad, but specifically, which fuse needs

replacement. This feature provides

rapid troubleshooting for the contractor

inspecting an installation. One can tell

instantly (visually) whether a fuse is bad.

remove the two stainless steel hinge clips and move them to the right-

hand side. This permits the door to hinge on the right.