Install Instructions

Installation Instructions for Drain Pan
2. Attach CS-3 ood
sensor to drain with
“Easy Clip” Bracket.
1. Disconnect power to
HVAC unit at Main panel
before installation.
3. Wire the sensor per
the attached instructions
and diagram. Can be
connected with either
Red or Yellow wires.
4. Test sensor function by
lifting oat while the HVAC
unit is running to ensure unit
stops when the oat ascends
to trip point.
5. Plug pan or line and ll
pan with water to verify water
height at sensor actuation.
Raise or lower sensor to
adjust the actuation height
and tighten nut.
OFF
Red
White
Green
Yellow
Furnace / AC
From ThermostatTo Switch
6. Place supplied
warning sticker on air
handler unit.
DiversiTech Corporation
6650 Sugarloaf Parkway, Duluth, GA 30097 USA
For more information visit: www.diversitech.com
CS-3