Item Brochure

w: DiversifiedWoodcrafts.com / e: [e-mail] / p: 877.348.9663
* All Fastrak Products Shipped in Five Business Days (Quantity Restrictions: 30 Per Table; 6 Per Cabinet)
53
Desk Accessories
ADA Instructor Desk
An accessible instructor's desk. This unit has a roll-under sink with paddle handle cold
water faucet and gas fixture. The knee space is wide enough for a wheel chair to fit into the
space (sink measures: 14"W x 10"D x 5"H). The 34"H meets ADA requirements (having a
19"depth, 27" knee height, 30" width and 8-1/2" knee clearance from the front table top
edge). It includes a duplex outlet, file drawer, three smaller drawers and a pull-out writing
board. It is finished with a chemical resistant, earth-friendly UV finish. Choose from either
a 1" solid epoxy or 3/4" phenolic resin top with an epoxy sink and a rod socket. Unit also
includes a greenlaw arm. Overall size: 72"W x 30"D x 34"H.
1214K-L-ADA 3/4" Solid Phenolic
1216K-L-ADA 1" Epoxy Resin
ITEM # TOP
100994* LabHand
100994X6* LabHand (Set of 6)
LabHand
Designed to provide a safe, convenient surface for laptops, tablets
or books in a laboratory setting. The LabHand is mounted on a
solid plastic rod which fits securely into standard rod sockets.
The platform is made of powder coat steel to create a surface
that will withstand the typical chemicals found in laboratories.
The LabHand holds laptops and books off the work surface
ITEM # PRODUCT
protecting them from spills and increasing the amount of workspace
available. 12" square with 5-1/2" rod.
Greenlaw Arm Upright Set
100002* 3/4" x 3/4" Clamp
100003* 3/4" x 1/2" Clamp
100004* 3/4" x 36" Upright
100005 3/4" x 18" Crossbar
100006* 3/4" x 48" Crossbar
100007* 1/2" x 40" Crossbar
100008 1/2" x 32" Crossbar
100245GRARM* Greenlaw Arm
100604* Upright Set w/Full Crossbar
ITEM # PRODUCT
ITEM # SIZE PRODUCT ITEM # SIZE PRODUCT
Greenlaw Arm
Includes 3/4" x 3/4" clamp, a 3/4" 36" upright and a 3/4" x 18" crossbar. Fits in a rod
socket with a 3/4" receiver.
Upright Set
Includes two each 3/4" x 1/2" clamp, two 3/4" x 36" upright and a 1/2" x 40" crossbar.
Fits in a rod socket with a 3/4" receiver.
Uprights, Crossbars, Clamps
Solid machined aluminum, these units are nearly impossible to break.