Item Brochure

p: 877.348.9663 / e: [e-mail] / w: DiversifiedWoodcrafts.com
* All Fastrak Products Shipped in Five Business Days (Quantity Restrictions: 30 Per Table; 6 Per Cabinet)
98
Specialty
Ceramic Work Center
This work center can be used against a wall or as an island. The unit includes
two base cabinets made of plywood and solid hardwoods finished in an
earth-friendly UV finish. One locking base cabinet provides a place for storing
larger items and includes one adjustable shelf. The other cabinet has three
dovetailed drawers which lock. Also included with this model is our mobile clay
cart (see C-38), which fits nicely between the two cabinets. The center is
completed with a 1-1/4" almond plastic laminate top.
Clay Wedging Table
This wedging table was developed with teacher input. It has a solid maple apron
and legs. But the real feature is the top. The top is a 1-1/4" ChemGuard covered
with a canvas. (Do not put canvas in dryer after washing, needs to be air-dried.)
The wedging table's canvas top is held on with Velcro making it easy to remove,
clean and reattach. The top also has a clay cutter wire mounted to the top and
angled across the depth of the top. The wire is secured with a twist-lock fastener,
so if the wire stretches, you can easily tighten it again.
Mobile Clay Cart
Sturdily constructed of maple plywood, this clay cart will provide years of service.
The inside has a removable liner; top is fitted with piano hinge, and recessed pull.
The top can remain open while class is in session. Made to roll easily on casters.
The unit can be used individually or in conjunction with any ceramic bench. Finished
naturally with an earth-friendly UV finish. Weight: 50 lbs.
C-38 18-1/4"W x 14-1/8"D x 28-1/2"H
CWC-72P 72"W x 30"D x 34-1/4"H
ITEM # SIZE
ITEM # SIZE
CWC-72P shown with included
C-38 Clay Cart
ITEM # SIZE
WT7142M30N 60"W x 30"D x 30"H
250480 1 18" x 14" x 18" 21"W x 21-1/2"D
250481 2 18" x 12" x 18" 39"W x 21-1/2"D
250483 3 18" x 12" x 18" 57"W x 21-1/2"D
PART # # OF SINKS BOWL SIZE UNIT SIZE
Budget Compartment Sink
18 gauge T-430 stainless steel budget sinks have 1-1/2" rounded front and side
edges. The 1-5/8" galvanized legs have adjustable high impact corrosion resistant
feet. The sinks have 3-1/2" drains and accommodate 8" over counter splash mount
faucets. Uses fixture #250784. (Faucet is not included, see page 63).