User guide

Using the NiTek Plus
NiTek Plus Dive Computer User Manual 41
Profile mode
Profile mode enables you to see a record of the depths you
reached at various points during a dive. You can display a
detailed profile of each dive stored in the log. When a dive is
selected, the computer automatically displays the depth and the
time in the dive when you reached that depth until it reaches the
end of the dive.
Dive profile information is either stored in 15- or 30-second
intervals during a dive. This must be set in dive mode before a
dive. Refer to “Setting the dive profile sampling rate” for more
information.
The dive number and date of the dive are displayed when you
scroll through the dives. This makes it easy to find the dive
profile you want to view.
2
1
3
4
(1) Dive log entry number: This is the dive number that
corresponds to the dive number when in log mode.
(2) Dive time: This tells you at what time during the dive you
reached the depth indicated.
(3) Depth: This is the depth that corresponds to the displayed
dive time. Depending on what profile sampling rate you have set,
either two depth readings (30-second rate) or four depth readings
(15-second rate) are displayed for each minute during a dive.
(4) FO2 percentage: This shows the mix number and FO2
percentage of the gas being used at each point during the dive.